TUBE: 6360 (= QQE03/12, twin beam power tetrode)
FICHIER SOURCE: sheets/077/6/6360.pdf
FABRICANT: Tung-Sol Electric Inc.
ANNEE: Fevrier 1963
LANGUE: en

===== PAGE 1 =====
TUNG-SOL — PRODUCT BULLETIN — INDUSTRIAL ELECTRON TUBE TYPE 6360 — February 1963
TWIN BEAM POWER TUBE
DESCRIPTION: "The 6360 is a twin beam tetrode for service as a Class C amplifier, oscillator, or frequency multiplier, for frequencies to 200 mc." Aussi A.F. modulator. 16 W output @ 200 mc ICAS.
"The two sections share a common cathode and a common screen grid... internal neutralization for push pull operation." Center-tapped heater (6.3 ou 12.6V).
ELECTRICAL DATA — Cathode oxide coated, indirectly heated:
                          Parallel | Series
  Heater Voltage          6.3 / 12.6 Volts
  Heater Current          0.82 / 0.41 Amperes
Interelectrode Capacitance:  Push-Pull | Per Unit
  Output                  1.4 / 2.6 pF
  Input                   5.1 / 6.2 pF
  Plate to Grid No.1 (max)  - / 0.1 pF
  Mu (Grid No.2 to Grid No.1), Ib=30mA = 7.5
  Transconductance, Ib=30mA = 3300 micromhos
MECHANICAL DATA:
  Bulb T6 1/2 ; Base Small button 9-pin E9-1 (Noval) ; Mounting any ; Max pin temp 120C ; Max bulb temp 225C ; Net wt 0.6 oz
TYPICAL POWER OUTPUT (push-pull):                ICS / ICAS
  Class C CW Tel/FM Tel to 200mc = 12.0 / 16.0 W
  Class C Frequency Multiplier to 200mc = 3.5 / 4.8 W
  Class C Plate & Screen AM Mod to 200mc = 7.1 / 8.8 W
  Class AB1/AB2 AF Amplifier & Modulator = 12.0 / 17.5 W
BOTTOM VIEW pinout (E9-1): pin1=1G1 ; pin2=K ; pin3=2G1 ; pin4=H ; pin5=H ; pin6=1P ; pin7=G2 ; pin8=2P ; pin9=HCT (heater center tap)

===== PAGE 2 =====
RF POWER AMPLIFIER & OSCILLATOR - CLASS C TELEGRAPHY:
  MAX RATINGS (CCS): Plate V=300 ; Grid2 V=200 ; Max sig plate I=2x50 mA ; Max sig plate input=2x15 W ; Plate diss=2x7 W ; Grid2 diss=2x1 W ; Grid1 diss=2x2 W ; Grid1 V=-150 ; Grid resistor=100 kohm ; Peak heater-cathode V=100
  TYP OP (2 units, CCS): Va=300/250/200 ; Vg2=200/200/200 ; Vg1(fixed bias)=-21.5 ; Peak g1=43.5/44.5/43.5 ; Ia sig0=30/30/30 ; Ia sig max=72/69/66 mA ; Ig2 sig0=1.2/1.4/2.4 ; Ig2 sig max=12.6/12.4/14.0 mA ; Eff load p-p=10000/8000/6500 ohm ; Po=12/9.3/7.0 W ; THD=2.5/2.7/3.2% ; eff=56/54/53%
AF POWER AMPLIFIER & MODULATOR CLASS AB1 PUSH-PULL:
  MAX RATINGS (CCS): Plate V=300 ; Grid2 V=200 ; Max sig plate I=2x50 ; Max sig plate input=2x15 W ; Plate diss=2x7 ; Grid2 diss=2x1 ; Grid2 diss=2x2 ; Grid1 V=-150 ; Grid1 diss=2x0.2 ; Grid1 I=2x4 mA ; Grid1 resistor=100 kohm ; Cathode I=2x60 mA ; Peak cathode I=2x300 mA ; Peak heater-cathode V=100
  TYP OP (2 units): Va=300/250/200 ; Vg2=200/200/200 ; Vg1=-21.5 ; Ia sig0=30/30/30 ; Ia sig max=100/100/82.2 mA ; Ig2 sig0=1.2/1.4/2.4 ; Ig2 sig max=11.4/13/19 mA ; Eff load p-p=6500/5000/5000 ohm ; Grid1 I sig max=2x0.56/2x0.62/2x0.22 mA ; Driving power=0.04/0.04/0.02 W ; Po=17.5/14.0/8.7 W ; THD=5/5.5/6% ; eff=58/56/53%
FREQUENCY TRIPLER TO 200 MC:
  MAX RATINGS CCS/ICAS: Plate V=300/300 ; Grid2 V=200/200 ; Grid1 V=-150/-150 ; Plate I=2x30/2x42 mA ; Grid1 I=2x2/2x3 mA ; Plate diss=2x7.5/2x10 W ; Grid2 input=2x1/2x1 W ; Cathode I=2x35/2x45 mA ; Peak cathode I=2x225/2x300 mA ; Peak heater-cathode V=100/100
  TYP OP push-pull (CCS): Va=300/250/200 ; Vg2=150/160/155 ; Vg1 resistor=- /47/15 kohm ; Vg1 fixed=-100 ; Peak g1=230/230/230 ; Ia=2x24/2x25/2x32.5 mA ; etc; Po=6.5/5/3.8 W ; eff=45/40/33.5%
PLATE & SCREEN GRID MODULATOR, PUSH-PULL RF PA CLASS C TELEPHONY:
  MAX RATINGS CCS/ICAS: Plate V=240/240 ; Grid2 V=200/200 ; Grid1 V=-150/-150 ; Plate I=2x37.5/2x46 mA ; Grid1 I=2x3/2x4 ; Plate input=2x7.5/2x10 W ; Grid2 input=2x0.65/2x0.65 W ; Plate diss=2x3.3/2x4.6 W ; Cathode I=2x40/2x52 ; Peak cathode I=2x180/2x240 mA
  TYP OP (2 units): Va=200/200 ; Vg2=fig1/fig2 ; Vg1 from common resistor 33/15 kohm ; Po=8.1/9.8 W ; useful out=7.1/8.8 W

===== PAGE 3 =====
RF PA & OSCILLATOR CLASS C TELEGRAPHY & FM TELEPHONY to 200mc:
  MAX RATINGS CCS/ICAS: Plate V=300/300 ; Plate I=2x45/2x55 mA ; Grid2 V=200/200 ; Grid1 V=-150/-150 ; Cathode I=2x50/2x65 mA ; Peak cathode I=2x225/2x300 ; Plate input=2x11.25/2x15 W ; Plate diss=2x5/2x7 ; Grid2 diss=2x1/2x1 ; Grid1 diss=2x0.2/2x0.2 ; Peak heater-cathode V=100
  TYP OP push-pull values listed (Va 300/250/200...).
[reste de la page: courbes] Plate current characteristic per unit (Vg2=150V), screen current, grid current characteristics per unit.

===== PAGE 4 =====
[courbes seules] Constant current characteristics, screen voltage = 200V. Tung-Sol Electric Inc., Newark, NJ.