TUBE: 6CY7
FICHIER SOURCE: sheets/049/6/6CY7.pdf
FABRICANT: RCA (Radio Corporation of America, Harrison, NJ)
ANNÉE: 10-59 (octobre 1959)
TYPE: Dual Triode (triode double DISSIMILAIRE: Unit 1 high-mu, Unit 2 low-mu), chauffage indirect, 9 broches miniature

===== PAGE 1 =====
RCA — 6CY7 — DUAL TRIODE With High-Mu Unit and Low-Mu Unit — 9-PIN MINIATURE TYPE
GENERAL DATA
Electrical:
Heater, for Unipotential Cathodes:
  Voltage (AC or DC) ............. 6.3 ± 10% volts
  Current ........................ 0.75 amp
Direct Interelectrode Capacitances (Approx., without external shield):
                          Unit No.1 / Unit No.2
  Grid to plate ......... 1.8 / 4.4 µµf
  Grid to cathode and heater .... 1.5 / 5 µµf
  Plate to cathode and heater ... 0.3 / 1 µµf

Characteristics, Class A1 Amplifier:
                          Unit No.1 / Unit No.2 (deux conditions)
  Plate Supply Voltage ......... 250 / 60 / 150 volts
  Grid Voltage ................. -3 / 0 / — volts
  Cathode Resistor ............. — / — / 620 ohms
  Amplification Factor ......... 68 / — / 5
  Plate Resistance (Approx.) ... 52000 / — / 920 ohms
  Transconductance ............. 1300 / — / 5400 µmhos
  Plate Current ................ 1.2 / 80* / 30 ma
  Plate Current for grid volts = -30 .... — / — / 3.5 ma
  Grid Voltage (Approx.) for plate µa = 10 .... -5.5 / — / — volts
  Grid Voltage (Approx.) for plate µa = 200 ... — / — / -40 volts

Mechanical:
  Operating Position ............. Any
  Maximum Overall Length ......... 2-5/8"
  Maximum Seated Length .......... 2-3/8"
  Length, Base Seat to Bulb Top (Excl. tip) .... 2" ± 3/32"
  Diameter ....................... 0.750" to 0.875"
  Bulb ........................... T6-1/2
  Base ........................... Small-Button Noval 9-Pin (JEDEC No. E9-1)
  Basing Designation (Bottom View) ... 9LG
  Pin 1 - Plate of Unit No.2
  Pin 2 - Internal Connection - Do Not Use
  Pin 3 - Grid of Unit No.2
  Pin 4 - Heater
  Pin 5 - Heater
  Pin 6 - Plate of Unit No.1
  Pin 7 - Grid of Unit No.1
  Pin 8 - Cathode of Unit No.1
  Pin 9 - Cathode of Unit No.2

===== PAGE 2 =====
VERTICAL-DEFLECTION OSCILLATOR (Values for Unit No.1)
Maximum Ratings, Design-Maximum Values (525-line, 30-frame):
  DC PLATE VOLTAGE ................... 350 max volts
  PEAK NEGATIVE-PULSE GRID VOLTAGE ... 400 max volts
  PLATE DISSIPATION .................. 1 max watt
  PEAK HEATER-CATHODE VOLTAGE: Heater neg 200 max volts; Heater pos 200 max volts
  Maximum Circuit Values: Grid-Circuit Resistance .... 2.2 max megohms

VERTICAL-DEFLECTION AMPLIFIER (Values for Unit No.2)
Maximum Ratings, Design-Maximum Values (525-line, 30-frame):
  DC PLATE VOLTAGE ................... 350 max volts
  PEAK POSITIVE-PULSE PLATE VOLTAGE .. 1800 max volts
  PEAK NEGATIVE-PULSE GRID VOLTAGE ... 250 max volts
  CATHODE CURRENT: Peak 120 max ma; Average 35 max ma
  PLATE DISSIPATION .................. 5.5 max watts
  PEAK HEATER-CATHODE VOLTAGE: Heater neg 200 max volts; Heater pos 200 max volts (DC component max 100 volts)
  Maximum Circuit Values: Grid-Circuit Resistance for cathode-bias operation .... 2.2 max megohms
RCA Electron Tube Division, Harrison, NJ. 10-59.