TUBE: EL34 SOURCE FILE: sheets/164/e/EL34.pdf MANUFACTURER: Svetlana Electron Devices (St. Petersburg, Russia; US offices AL/CA) YEAR: 4/97 (April 1997) PAGES: 2 (page 1 data, page 2 typical operation + curves) TYPE (per PDF): High Performance Audio Power Pentode (EL34/6CA7) ===== PAGE 1 ===== SVETLANA TECHNICAL DATA — EL34/6CA7 — High Performance Audio Power Pentode Glass envelope power pentode, plate dissipation 25 W (convection cooling). Pentode, ultralinear or triode connection. Indirectly-heated oxide cathode. Manufactured to original Mullard design. Electrical Heater Voltage (AC or DC): Min 5.7 / Nom 6.3 / Max 6.9 V Heater Current: 1.6 A Cathode: Oxide-coated, unipotential Cathode-to-heater potential, max: 100 V Direct interelectrode capacitances, max (without external shielding, nominal): Grid no.1 to cathode and g3, g2, base sleeve and heater < 16 pF (Cin/Cgk) Plate to cathode and g3, g2, base sleeve and heater < 0.6 pF (Cout/Cak) [NOTE: unusually low; spec is "max" with full shield] Grid no.1 to plate < 1.1 pF (Cga) Mechanical Operating Position: Any Base: JEDEC #8ET, octal, 8-pin Max dimensions: Height 113 mm; Seated height 98 mm; Diameter 32 mm Cooling: Convection ; Net weight ~60 g Pinout (Bottom view, Octal): pin1=G3; pin2=H(heater); pin3=P(plate); pin4=G2; pin5=G1; pin6=NC; pin7=H(heater); pin8=K(cathode) AF Power Amplifier — Maximum ratings DC plate voltage 800 V Grid no.2 DC (screen) voltage 500 V Grid no.1 (control) voltage -100 V DC cathode current 150 mA Plate dissipation 25 W Grid no.2 DC (screen) dissipation 8 W Bulb temperature (hottest point) 250 C ===== PAGE 2 ===== Typical Operation — AF Power Amplifier, Class A1 (single tube) Plate Voltage 250 V Grid 2 Screen Voltage 250 V Grid 1 Control Voltage* -14 V Peak AF Grid 1 Control Voltage 14 V Zero Signal Plate Current 100 mA Maximum Signal Plate Current 105 mA Zero Signal Grid 2 Screen Current (avg) 15 mA Transconductance (nominal) 11,000 uS (= 11 mA/V) Load Resistance 2000 Ohms Output Power at 5% distortion 10 W * Approximate value (set to zero signal plate current) [courbes seules — pas de données tabulaires] (Transfer: plate current vs grid voltage, Plate V=250, Screen V=250/300/400; Plate characteristics: plate current vs plate voltage, Screen V=250, Grid V=0/-5/-10/-20/-30)