Tube shapes catalogue

Every envelope on this page is drawn from measured dimensions: the same turning profile feeds the 3D model and its static silhouette, so what you compare is the published size of each tube, not an illustration.

Millimetres, origin at the pin tips, Y upwards. A check mark means the figure was read on a cited datasheet line; a wavy sign means a family default, an assumed unit or general knowledge.

datasheet cited · model or editorial reading · catalogue value, no citation attached yet · nothing invented

249 of 315 catalogue tubes have a resolved shape.

Envelope families

Silhouette of the 6111 at scale

T-3

Ø nominal 9.5 mm

Ø max 10.2 mm

6 tubes

reference: 6111

Silhouette of the 6AU6 at scale

T-5.5

Ø nominal 17.5 mm

Ø max 19.1 mm

13 tubes

reference: 6AU6

Silhouette of the 12AX7 at scale

T-6.5

Ø nominal 20.6 mm

Ø max 22.2 mm

89 tubes

reference: 12AX7

Silhouette of the 6V6GT at scale

T-9

Ø nominal 28.6 mm

Ø max 30.2 mm

23 tubes

reference: 6V6GT

Silhouette of the 6L6GC at scale

T-12

Ø nominal 38.1 mm

Ø max 39.7 mm

23 tubes

reference: 6L6GC

Silhouette of the EL34 at scale

T-12-slim

Ø nominal 33.3 mm

Ø max 33.3 mm

10 tubes

reference: EL34

Silhouette of the 6J5 at scale

MT-8

Ø nominal 25.4 mm

Ø max 33.3 mm

7 tubes

reference: 6J5

Silhouette of the E55L at scale

B9D

Ø nominal 30.2 mm

Ø max 30.2 mm

5 tubes

reference: E55L

Silhouette of the 45 at scale

ST-14

Ø nominal 44.5 mm

Ø max 46 mm

12 tubes

reference: 45

Silhouette of the 2A3 at scale

ST-16

Ø nominal 50.8 mm

Ø max 52.4 mm

23 tubes

reference: 2A3

Silhouette of the 300B at scale

ST-19

Ø nominal 60.3 mm

Ø max 61.9 mm

10 tubes

reference: 300B

Silhouette of the KT88 at scale

TT-GEC

Ø nominal 52 mm

Ø max 52 mm

5 tubes

reference: KT88

Silhouette of the EL3N at scale

P-EU

Ø nominal 46 mm

Ø max 46 mm

10 tubes

reference: EL3N

Silhouette of the 845 at scale

T-18

Ø nominal 57.2 mm

Ø max 58.7 mm

3 tubes

reference: 845

Iconic tubes side by side

Same scale, sorted by overall height. Select a tube to open it in the viewer. 13 tubes: scroll the rail sideways.

6AU6

miniature-7×T-5.5

Maximum diameter

19mm

Seated height

47.6mm

Overall height

54mm

12AX7

noval×T-6.5

Maximum diameter

22.2mm

Seated height

49.2mm

Overall height

55.6mm

6J5

octal×MT-8

Maximum diameter

33.3mm

Seated height

52.4mm

Overall height

66.7mm

ECC40

rimlock×T-6.5

Maximum diameter

22mm

Seated height

61mm

Overall height

67mm

6111

submini-8×T-3

Maximum diameter

10.2mm

Seated height

38.1mm

Overall height

76.2mm

EL84

noval×T-6.5

Maximum diameter

22.2mm

Seated height

71.4mm

Overall height

77.8mm

6V6GT

octal×T-9

Maximum diameter

30.2mm

Seated height

69.9mm

Overall height

84.1mm

6L6GC

octal×T-12

Maximum diameter

39.7mm

Seated height

93.7mm

Overall height

112mm

EL34

octal×T-12-slim

Maximum diameter

33.3mm

Seated height

98mm

Overall height

112mm

KT88

octal×TT-GEC

Maximum diameter

52mm

Seated height

110mm

Overall height

125mm

2A3

ux4×ST-16

Maximum diameter

52.4mm

Seated height

120.7mm

Overall height

136.5mm

300B

ux4×ST-19

Maximum diameter

61.9mm

Seated height

134.9mm

Overall height

165.1mm

845

ux4×T-18

Maximum diameter

58.7mm

Seated height

181mm

Overall height

200mm

Viewer

Silhouette of the 300B at scale
Dimensions of the 300B — ux4×ST-19
Overall height165.1mm

Western Electric (Bell System Practices, Section AB46.300B) — [outline drawing — ST19 BULB; dimensions 2-7/16" / 1-9/16" / 1-13/16" / 5-5/16"…

1 other readings
  • 165mm

    JJ Electronic (www.jj-electronic.sk), p. 1 — max 62 / max 45 (dia); max 145 / max 165 (height).

Seated height134.9mm

same source as above — 4e cote 5-5/16" = 134,9 mm = hauteur assise (JJ : 145 — divergence constructeurs, conservée en alternative)

1 other readings
  • 145mm

    JJ Electronic (www.jj-electronic.sk), p. 1 — max 62 / max 45 (dia); max 145 / max 165 (height).

Maximum diameter61.9mm

same source as above — liste non étiquetée de 5 cotes ; 2-7/16" = 61,9 mm = Ø max (cohérent ST-19 : Ø nominal 60,3, max 61,9 ; cohérent JJ « max 62 »)

2 other readings
  • 62mm

    JJ Electronic (www.jj-electronic.sk), p. 1 — max 62 / max 45 (dia); max 145 / max 165 (height).

  • 45mm

    JJ Electronic (www.jj-electronic.sk), p. 1 — max 62 / max 45 (dia); max 145 / max 165 (height).

Base diameter39.7mm

same source as above — 2e cote 1-9/16" = 39,7 mm = Ø du culot WE (le culot UX4 medium standard fait 34,9 ; WE 300B : 39,7)

Pin length30.2mm
Envelope familyux4×ST-19
Baseux4
Top capnone
  • Pin length derived from two heights is implausible for this base; kept as read and flagged.
    • 30.2 mm derived, 19 mm usual for a ux4 base
  • Glass foot wider than the base skirt (family profile kept as is).
    • foot radius 22.686 mm, skirt radius 19.85 mm
  • Manufacturers disagree on at least one dimension; other readings are listed.
    • diaMaxMm: 61.9 mm kept, 45 mm according to JJ Electronic (www.jj-electronic.sk)

Bases seen from below

27 base codes · Pin angles are symbolic (pinout diagram), not measured.

Base noval seen from below

noval

9 pins

pin circle11.89mm

skirt22.2mm

Base octal seen from below

octal

8 pins

pin circle17.46mm

skirt32.5mm

Base ux4 seen from below

ux4

4 pins

pin circle19.5mm

skirt34.9mm

Base ux5 seen from below

ux5

5 pins

pin circle19.5mm

skirt34.9mm

Base miniature-7 seen from below

miniature-7

7 pins

pin circle9.53mm

skirt19.05mm

Base b7g seen from below

b7g

7 pins

pin circle9.53mm

skirt19.05mm

same base as miniature-7

owner decision pending — b7g ≡ miniature-7 (même culot B7G) — doublon de data/tubes.json, ne pas fusionner

Base magnoval seen from below

magnoval

9 pins

pin circle17.46mm

skirt30.2mm

Base compactron seen from below

compactron

12 pins

pin circle19.05mm

skirt39.7mm

Base compactron-12 seen from below

compactron-12

12 pins

pin circle19.05mm

skirt39.7mm

same base as compactron

owner decision pending — 6JE6B / 6JQ6 / 6LQ6 sont des Novar E9-88 selon l'OCR (6JE6A__sheets_049_6_6JE6A.txt:29) — owner_decision

Base novar-9 seen from below

novar-9

9 pins

pin circle17.46mm

skirt39.7mm

Base submini-8 seen from below

submini-8

8 pins

Base submini-9 seen from below

submini-9

8 pins

Base subminiature seen from below

subminiature

8 pins

same base as submini-8

owner decision pending — subminiature ≡ submini-8 (5977) — doublon de code, ne pas fusionner

Base p8a seen from below

p8a

8 pins

skirt35mm

Base p8a-sc seen from below

p8a-sc

8 pins

skirt35mm

same base as p8a

owner decision pending — distinction p8a / p8a-sc non documentée par l'OCR

Base b4-eu seen from below

b4-eu

4 pins

pin circle22.6mm

skirt35mm

Base 6c33 seen from below

6c33

7 pins

pin circle40mm

skirt50mm

Base gm70 seen from below

gm70

4 pins

pin circle25mm

skirt45mm

Base loctal seen from below

loctal

8 pins

pin circle17.5mm

skirt32mm

Base special-8 seen from below

special-8

8 pins

pin circle17.5mm

skirt32mm

same base as loctal

owner decision pending — special-8 (C3g, C3m) ≡ loctal (Kontinentaler Schlüsselsockel) — doublon de code, ne pas fusionner

Base rimlock seen from below

rimlock

8 pins

pin circle11.75mm

skirt22mm

Base decal seen from below

decal

10 pins

pin circle17.5mm

skirt22.2mm

defined per tube

owner decision pending — deux culots sous un code (EFL200 10C12 verre Ø 22,2 vs EL156 Stahl-10 Ø 48)

Base nuvistor-5 seen from below

nuvistor-5

5 pins

pin circle6mm

skirt11.2mm

Base coaxial seen from below

coaxial

0 pins

defined per tube

Base special seen from below

special

0 pins

defined per tube

Base special-5 seen from below

special-5

0 pins

defined per tube

owner decision pending — GU81 : code '5' incohérent avec l'OCR (8 broches, GU81__GU81.txt:20)

Base special-6 seen from below

special-6

6 pins

defined per tube

Coverage and scope

  • 80 shapes with every key dimension read on a datasheet
  • 2 shapes with a dimension attributed by hand from an unlabelled drawing
  • 58 shapes with a derived dimension
  • 22 shapes with a dimension read without a printed unit
  • 85 shapes completed by a family default
  • 2 shapes resting on general knowledge only
  • 66 tubes without a resolved shape (listed, never defaulted)
    • Shape not resolved: envelope family ambiguous for this base. 44
    • Shape not resolved: this envelope is not a solid of revolution. 2
    • Shape not resolved: special base without a curated entry. 20

Out of scope for this release: internal structure (plates, grids, micas, getter), markings, the tube page and the comparator, GLB export.