Ampera
6888 Pentode Vacuum Tube
Small-signal pentode for low-noise voltage amplification
PentodeHeater 6.3 V · 0.8 A7-pin MiniatureRCA 1960
- Plate dissipation
- 8W
- Max plate voltage
- 250V
- Transconductance
- 5mA/V
Characteristics
Datasheet values, once each. Every value cites its sheet.
HeaterIndirectly heated
| Heater voltageVh | 6.3 V | |
|---|---|---|
| Heater currentIh | 0.8 A |
Limiting valuesDatasheet maximum ratings — not to be exceeded
| Plate voltageVa max | 250 V | |
|---|---|---|
| Plate dissipationPa max | 8 W |
Mechanical
| Base | 7-pin Miniature | |
|---|---|---|
| Rarity | Moderate | |
| Pinout |
Small signalDatasheet parameters at the reference operating point — not limits
| Transconductance | 5 mA/V | |
|---|---|---|
| Amplification factor | 10 |
Capacitances
| Input | 12 pF | |
|---|---|---|
| Grid–plate | 0.7 pF | |
| Output | 6.5 pF |
Charactereditorial reading, not a measurement
| Gain | 10% | |
|---|---|---|
| Power | 20% | |
| Drive | 50% | |
| Linearity | 95% |
datasheet cited · model or editorial reading · catalogue value, no citation attached yet · nothing invented
Using this tube
Replace or compare
Sources
Manufacturer datasheets
SPICE models
Revision and verification status
- Source
- Surplus Sales / Radiomuseum 6888 (octal Sylvania)
- Reviewed
- 2026-05-29
- Status
- DataModelCalc
- Model
- Koren pentode
Context
The 6888 is a indirectly-heated pentode from RCA, introduced around 1960. Commonly used in preamp applications. Enhanced pentode.
History
- Introduced
- 1960
- Manufacturer
- RCA
- Era
- Late Production
METRIX TESTER