Ampera
6Y6GT Tetrode Vacuum Tube
Beam power tetrode rated at 12.5W for high-power output stages
TetrodeHeater 6.3 V · 1.25 AOctalRCA 1940
- Plate dissipation
- 12.5W
- Max plate voltage
- 200V
- Max screen voltage
- 135V
- Transconductance
- 7mA/V
Characteristics
Datasheet values, once each. Every value cites its sheet.
HeaterIndirectly heated
| Heater voltageVh | 6.3 V | |
|---|---|---|
| Heater currentIh | 1.25 A |
Limiting valuesDatasheet maximum ratings — not to be exceeded
| Plate voltageVa max | 200 V | |
|---|---|---|
| Screen voltageVg2 max | 135 V | |
| Plate dissipationPa max | 12.5 W | |
| Screen dissipationPg2 max | 1.75 W |
Mechanical
| Base | Octal | |
|---|---|---|
| Rarity | Common | |
| Pinout |
Small signalDatasheet parameters at the reference operating point — not limits
| Transconductance | 7 mA/V | |
|---|---|---|
| Plate resistance | 9.3 kΩ |
Capacitances
| Input | 8.5 pF | |
|---|---|---|
| Grid–plate | 0.4 pF | |
| Output | 7 pF |
Charactereditorial reading, not a measurement
| Gain | 0% | |
|---|---|---|
| Power | 31% | |
| Drive | 91% | |
| Linearity | 75% |
datasheet cited · model or editorial reading · catalogue value, no citation attached yet · nothing invented
Using this tube
Interactive loadline calculator not available for this tube yet — it needs calibrated Koren or Ayumi parameters.
Replace or compare
Sources
Manufacturer datasheets
SPICE models
Revision and verification status
- Source
- qsl.net 6Y6 / amplifiedparts 6Y6GT
- Reviewed
- 2026-05-29
- Status
- DataModelCalc
- Model
- under review
Context
The 6Y6GT is a indirectly-heated beam tetrode from RCA, introduced around 1940. Commonly used in power applications. Beam power.
History
- Introduced
- 1940
- Manufacturer
- RCA
- Era
- Pre-War
METRIX TESTER