What is the 20A-EmissionLabs vacuum tube?

The 20A-EmissionLabs (20A EML) is a triode vacuum tube designed for power (set) applications. EML DHT..

What are the key specifications of the 20A-EmissionLabs?

Amplification factor μ ≈ 21, transconductance gm ≈ 4.5 mA/V, plate resistance rp ≈ 4.7 kΩ, max plate voltage 450 V, max plate dissipation 11 W, heater 5 V / 1.5 A.

Is the 20A-EmissionLabs still in production?

Production status varies by year and manufacturer. The current Amperatubes catalog classifies the 20A-EmissionLabs as Sought-after availability. NOS (new-old-stock) examples from RCA, Mullard, Tung-Sol, GE, Sylvania and Telefunken trade among collectors; modern production where it exists comes mostly from JJ Electronic, Electro-Harmonix, Tung-Sol (New Sensor), Genalex, and a handful of small-batch makers.

What does the 20A-EmissionLabs sound like?

EML DHT.. Sonic character also depends heavily on the circuit operating point, the surrounding tubes in the stage, and the output transformer when present — use the interactive loadline calculator on this page to explore the trade-offs.

20A-EmissionLabs 20A EML Triode Vacuum Tube

Power triode delivering 11W for push-pull and SET designs

TriodeHeater 5 V · 1.5 AUX-4Emission Labs 2005

Plate dissipation: 11W
Max plate voltage: 450V
Transconductance: 4.5mA/V

20A-EmissionLabs

Characteristics

Datasheet values, once each. Every value cites its sheet.

HeaterDirectly heated

Specifications of 20A-EmissionLabs — Heater
Heater voltageVh	5 V
Heater currentIh	1.5 A

Limiting valuesDatasheet maximum ratings — not to be exceeded

Specifications of 20A-EmissionLabs — Limiting values
Plate voltageVa max	450 V
Plate dissipationPa max	11 W

Mechanical

Specifications of 20A-EmissionLabs — Mechanical
Base	UX-4
Rarity	Sought-after
Pinout

Small signalDatasheet parameters at the reference operating point — not limits

Specifications of 20A-EmissionLabs — Small signal
Transconductance	4.5 mA/V
Plate resistance	4.7 kΩ
Amplification factor	21

Capacitances

Specifications of 20A-EmissionLabs — Capacitances
Grid–cathode	9 pF
Grid–plate	15 pF
Plate–cathode	7 pF

Charactereditorial reading, not a measurement

Specifications of 20A-EmissionLabs — Character
Gain	21%
Power	28%
Drive	95%
Linearity	90%

datasheet cited · model or editorial reading · catalogue value, no citation attached yet · nothing invented

Using this tube

Interactive loadline calculator not available for this tube yet — it needs calibrated Koren or Ayumi parameters.

Applications

SET output
Push-pull output

Generic triode power (set) stage

Hi-Fi stereo

Replace or compare

Sources

By Jean-Michel Falligan DevergneReviewed May 10, 2026Source : Emission Labs design notes (EML-12B-20A-20B-30A) · external audit feedback

Manufacturer datasheets

20A-EmissionLabs DatasheetFrank's Electron Tube Pages · PDF

SPICE models

Revision and verification status

Source: Emission Labs design notes (EML-12B-20A-20B-30A) · external audit feedback
Reviewed: 2026-05-10
Status: DataModelCalc
Model: under review

Context

The 20A-EmissionLabs is a directly-heated triode from Emission Labs, introduced around 2005. It provides a gain factor (μ) of 21 with 4670Ω plate resistance. Commonly used in power (set) applications. EML DHT.

History

Introduced: 2005
Manufacturer: Emission Labs
Era: Modern

METRIX TESTER