Ampera
6L6G Tetrode Vacuum Tube
Also known as 6L6GCBeam power tetrode rated at 19W for high-power output stages
TetrodeHeater 6.3 V · 0.9 AOctalRCA 1936
- Plate dissipation
- 19W
- Max plate voltage
- 360V
- Transconductance
- 6mA/V
Characteristics
Datasheet values, once each. Every value cites its sheet.
HeaterIndirectly heated
| Heater voltageVh | 6.3 V | |
|---|---|---|
| Heater currentIh | 0.9 A |
Limiting valuesDatasheet maximum ratings — not to be exceeded
| Plate voltageVa max | 360 V | |
|---|---|---|
| Plate dissipationPa max | 19 W | |
| Screen dissipationPg2 max | 2.5 W |
Mechanical
| Base | Octal | |
|---|---|---|
| Rarity | Moderate | |
| Pinout |
Small signalDatasheet parameters at the reference operating point — not limits
| Transconductance | 6 mA/V | |
|---|---|---|
| Plate resistance | 22.5 kΩ | |
| Amplification factor | 8 |
Capacitances
| Input | 11.5 pF | |
|---|---|---|
| Grid–plate | 0.9 pF | |
| Output | 9.5 pF |
Charactereditorial reading, not a measurement
| Gain | 8% | |
|---|---|---|
| Power | 48% | |
| Drive | 78% | |
| Linearity | 95% |
datasheet cited · model or editorial reading · catalogue value, no citation attached yet · nothing invented
Typical operation
Conditions published by the manufacturers, one row per condition. Nothing is computed.
| Setup | Va | Vg2 | Vg1 / Rk | Ia | Ig2 | Load | Pout | THD | gm | μ | rp | Source |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| triode connection, single-endedclass not stated · fixed bias | 250 V | -20 V | 40 mA | 1.4 W | 2 | read on the sheet TUNG-SOL · 1952 · transcript | ||||||
| Class A, single-endedpentode connection · fixed bias | 250 V | 250 V | -14 V | 72 mA | 5 mA | 2.5 kΩ | 6.5 W | 10% | 6 mA/V | 22.5 kΩ | OCR, to be checked TUNG-SOL · 1952 · p. 2 · transcript | |
| Class A, single-endedtriode connection · fixed bias | 250 V | -20 V | 40 mA | 5 kΩ | 1.4 W | 5% | 4.7 mA/V | 8 | OCR, to be checked TUNG-SOL · 1952 · p. 2 · transcript | |||
| Class A, push-pullpentode connection · fixed bias · values for two tubes | 250 V | 250 V | -16 V | 120 mA | 10 mA | 5 kΩ a-a | 14.5 W | 2% | OCR, to be checked TUNG-SOL · 1952 · p. 3 · transcript |
Using this tube
Applications
- High-power output
Zenith console radiosRCA MI-12246 theatre amp
Replace or compare
Sources
Manufacturer datasheets
Triode-connectedSYLVANIAMarch 1954
- Va
- 250 V
- Vg1
- -20 V
- µ
- 5
- RL
- 5000 kΩ
- Pout
- 1.4 W
- THD
- 5 %
SPICE models
Revision and verification status
- Source
- RCA datasheet
- Reviewed
- 2026-05-29
- Status
- DataModelCalc
- Model
- Koren v1
Context
The 6L6G is a indirectly-heated beam tetrode from RCA, introduced around 1936. It provides a gain factor (μ) of 8 with 22.5kΩ plate resistance. Commonly used in power (pp) applications. Original glass 6L6.
History
- Introduced
- 1936
- Manufacturer
- RCA
- Era
- Pre-War
METRIX TESTER